How do I mount and level the 20oz Skinny Straight Tumbler in the xTool F1 Ultra?

For the xTool F1 Ultra: 1) Ensure any necessary riser base or honeycomb removal is completed to allow clearance for 73mm diameter drinkware. 2) Insert the 20oz Skinny Straight Tumbler into the rotary fixture using Step 1 (50-80mm Jaw Position). 3) Adjust the leveling tilt angle to exactly 0° so the top rim and bottom base remain coplanar with the xTool F1 Ultra's laser nozzle.

What diameter and steps-per-rotation do I enter in LightBurn for this pairing?

In LightBurn Tools > Rotary Setup: Set steps-per-rotation to 12800 (or check $101=100). If engraving a small front logo, enter 73.00mm into the cylinder diameter field. If wrapping a 360° graphic, use our downloadable SVG generator for true conical warp.

Will the 20oz Skinny Straight Tumbler clear the laser gantry or housing on the xTool F1 Ultra?

The 20oz Skinny Straight Tumbler has a maximum outer diameter of 73mm and height of 205mm. Verify that any handle or mug curve clears the laser nozzle during a 360° dry framing run before firing the laser.

How do I focus the xTool F1 Ultra on the 20oz Skinny Straight Tumbler?

Focus the 160mm lens directly onto the apex (top tangent point) of the 20oz Skinny Straight Tumbler after leveling it by 0°. Overlap the red & blue dual laser pointer dots on the apex point of the blank.

Laser: xTool F1 Ultra Blank: 20oz Skinny Straight Tumbler Tilt: 0° Ø 73.00mm

xTool F1 Ultra + 20oz Skinny Straight Tumbler Rotary Setup Guide

Engineered parameters for mounting and engraving the 20oz Skinny Straight Tumbler on the xTool F1 Ultra. Configure chuck steps, rotary leveling tilt, and beam focus height below.

Tapered Tumbler Tilt-Angle & Conical Warp Tool

Active Blank: 20oz Skinny Straight Tumbler • Tumbler

Drinkware Blank Preset

1. Measured Blank Dimensions (Top, Base & Slant)Precision Caliper

Top Rim Outer Diameter

Circ: 229.3mm

Bottom Base Diameter

Circ: 229.3mm

Slant / Printable Height

Hypotenuse distance

2. Artwork Height & Seam AllowanceLogo Center: 50% from Top

Logo Height: 50mm

Vertical Placement: 50%

Include 2mm overlap seam allowance for full wrap sublimation or rotary masking

Conical Arc Template Preview • True Curvature

Cut Path Center Score

1:1 scale curved wrap SVG ready to import into LightBurn, XCS, Illustrator, or CAD.

Taper & Leveling TelemetryOPTICAL LEVELING

Mandatory Rotary Leveling Tilt Angle

0°tilt upwards

Tilt the rotary chuck or elevate the roller tailstock by 0°. This keeps the cup's outer engraving surface 100% parallel to the laser nozzle plane.

Effective Diameter at Logo Center (50% down)

73 mmenter in LightBurn

Enter this diameter in LightBurn Rotary Setup when engraving a single logo without full conical warping.

Circumference Distortion0.0%Top vs. Bottom

Conical Arc Angle360°Sector Span

Jig & Chuck Advice:

Perfect cylinder requires 0° tilt. Level flat on roller or horizontal chuck jaws without shims.

Recommended: Roller or ChuckStep 1 (50-80mm Jaw Position)

Sponsored Hardware & ToolingAd Slot (min-h: 250px)

Monetization Slot: Native Under-Download Banner

High-CTR container positioned directly below the SVG export and rotary calculations. Configure your Adsterra native key in src/config/adsterra.ts.

xTool F1 Ultra • 20oz Skinny Straight Tumbler Mechanical Pairing Parameters

Setup Matrix

Target Laser Platform	xTool F1 Ultra (20W Diode + 20W MOPA Fiber, Galvo DSP)
Target Drinkware Blank	20oz Skinny Straight Tumbler (Tumbler)
Recommended Rotary Fixture	Roller or Chuck
Recommended Chuck Jaw Step	Step 1 (50-80mm Jaw Position)
Rotary Leveling Tilt Angle	0°
Midpoint Average Diameter	73.00 mm (Circ: 229.3 mm)
Top Rim Circumference	229.34 mm (Full 360° Wrap)
Default Pulses / Rev	12800 pulses/rev
Focal Length & Alignment	160mm lens • Overlap the red & blue dual laser pointer dots on the apex point of the blank.

Parent Machine Instrument

Need to calibrate the xTool F1 Ultra motor steps?

Open the dedicated xTool F1 Ultra SPR calibrator to burn a 20x100mm test ruler.

Open xTool F1 Ultra Calibrator →

Parent Drinkware Geometry

Need full conical wrap templates for 20oz Skinny Straight Tumbler?

View all 18 machine pairings, sector angles, and wrap generators for this blank.

Open 20oz Skinny Straight Tumbler Guide →

xTool F1 Ultra + 20oz Skinny Straight Tumbler Setup Technical FAQs

Q1: How do I mount and level the 20oz Skinny Straight Tumbler in the xTool F1 Ultra?: For the xTool F1 Ultra: 1) Ensure any necessary riser base or honeycomb removal is completed to allow clearance for 73mm diameter drinkware. 2) Insert the 20oz Skinny Straight Tumbler into the rotary fixture using Step 1 (50-80mm Jaw Position). 3) Adjust the leveling tilt angle to exactly 0° so the top rim and bottom base remain coplanar with the xTool F1 Ultra's laser nozzle.
Q2: What diameter and steps-per-rotation do I enter in LightBurn for this pairing?: In LightBurn Tools > Rotary Setup: Set steps-per-rotation to 12800 (or check $101=100). If engraving a small front logo, enter 73.00mm into the cylinder diameter field. If wrapping a 360° graphic, use our downloadable SVG generator for true conical warp.
Q3: Will the 20oz Skinny Straight Tumbler clear the laser gantry or housing on the xTool F1 Ultra?: The 20oz Skinny Straight Tumbler has a maximum outer diameter of 73mm and height of 205mm. Verify that any handle or mug curve clears the laser nozzle during a 360° dry framing run before firing the laser.
Q4: How do I focus the xTool F1 Ultra on the 20oz Skinny Straight Tumbler?: Focus the 160mm lens directly onto the apex (top tangent point) of the 20oz Skinny Straight Tumbler after leveling it by 0°. Overlap the red & blue dual laser pointer dots on the apex point of the blank.